Multifunction Energy Meter : 5 Must know Facts

Multifunction Energy Meters are used for monitoring electrical installations. A Multifunction energy meter monitors and measures all the electrical parameters such as voltage, active power, apparent power, current, power factor, reactive power, Active energy, phase angle and so on. This machine is particularly used in cases where exact, accurate, and reliable measurement is required. Let’s take a look at a few facts regarding a multifunction energy meter :

  1. A multifunction energy meter is widely used in the industry sector. It is widely used for motor control centres, control panels, Genset panels, power distribution panels, and so on.
  2. Multifunction energy meter is very useful for industries across India and the globe. It helps in reducing energy cost by constant monitoring and tracking energy consumption. It also takes the backup of other integrated parameters.
  3. A multifunction energy meter can also be a hand-held device that can be used for basic fault-findings in the electrical system. It can also be a bench instrument which can ensure a high degree of accuracy in its calculation.
  4. These are helpful in troubleshooting a wide range of electrical problems such as for domestic appliances, electronic equipment used in the industry, power supplies, motor controls and the wiring system etc.
  5. Multifunction meters were first invented during the early 1920s. They were mostly in the form of radio receivers and vacuum tube electronic devices. The first millimetre was invented by Donald Macadie. He was dissatisfied with carrying separate instruments for maintaining the telecommunication circuits. It is when he invented a unique instrument that can measure volts, ohms, and amperes. At that time, the multifunction meter was known as Avometer. This meter comprised of voltage and precision resistors, sockets and switches for selecting ranges and a moving coil meter.

Hopefully, these pointers will give you a basic idea about nature and benefits multifunction meters.

M.B Control & Systems Pvt. Ltd. collaboration with SATEC – The Experts in Energy Management & Power Quality

M.B Control & Systems Pvt. Ltd. has been associated with SATEC for more than 25+ years for its hardware and software solution in electrical automation solutions. SATEC established in 1987 is a global leader in energy management solutions. They are known for their extensive research & development activities in the manufacturing of hardware and software offerings. With joint efforts, we have industry experts to provide technical support and solutions from generic to complex issues. Our distribution network provides local service and prompt professional support. SATEC’s device product line serves both energy utilities and energy consumers in various fields. Their support team is closely involved with each project to assure a solution of the highest quality that is tailored to the customer’s need. All devices comply with world recognised regulations and hence offers rewarding solutions enabling utilities and end-users to make better use of scarce resources, take timely actions and prevent equipment failures.

Multi-Function Meter: SATEC PM130EH+

Highlights:

  • Multifunctional 3-Phase Smart Meter
  • Billing/TOU Revenue Energy Meter
  • Class 0.2S/0.5S precision, TOU Tariffs
  • Harmonic Analyzer up to 40th harmony
  • Real-time 128 samples/cycle Waveform Capture
  • Available as ABT and Energy and Audit Meter as per CEA guidelines
  • 16 Programmable set points, thresholds and delays
  • Built-in RS-485 Port, optional RS-232, Ethernet, Profibus, RF and GPRS
  • Communication Protocols: MODBUS RTU, MODBUS ASCII, MODBUS TCP, DNP3.0 over serial and TCP, IEC-60870-5-101, IEC-60870-5-104, Profibus
  • Wide Range of Plug-in Modules – Digital IO’s, Analog Outputs, Communication Ports, etc.

High Performance Power Quality Meter: SATEC PM180

Highlights:

  • Exceeding Class 0.2S as per IEC 62053-22-2003
  • Measurement and Power Quality at 256 samples per cycle
  • Transient recording (option) of 2kV at 1024 samples per cycle (16/20μS)
  • Total Harmonic Distortion for Voltage and Current and up to the 63rd individual harmonic for V, I, P, Q
  • Digital fault recorder option – up to 50/100A current
  • Optional additional 4 or 8 current channels for fault analysis
  • Standard communication: Ethernet, USB, RS-232/485 and IR (on front panel)
  • Communication: FO Ethernet, 2G/3G cellular modem, Profibus
  • Expansion slots for a wide range of plug-in modules
  • Communication Protocols: Modbus RTU, ASCII, DNP 3.0, Modbus/TCP, DNP3/TCP, IEC 61850 (optional), IEC 60870-5-101/104 (optional)

IEC 61850 Power Meter: SATEC Pro Series PM335 and EM235

Highlights:

  • Class 0.2S accuracy per IEC 62053-22-2003
  • PM335: 3.5” LCD Display | EM235: 1.8” LCD Display
  • 256 samples per cycle
  • Power Quality and Measurement Capabilities: Harmonics Analysis, Programmable resolution waveform capture, screen display of waveforms and power quality data
  • AC / DC Measurements
  • Communication Protocols: IEC 61850, Ed. 2 (MMS and Goose Support), 2 independent ETH Ports, DHCP and DDNS support, PRP, Webserver, Modbus RTU, Modbus/TCP, DNP3/TCP,IEC 60870-5-101/104
  • On Board 2xDI, 1xRO & 1xAI
  • Built in Programmable Logic Controller (PLC)
  • USB port (Type C)
  • Add on modules (DI/RO/AI etc.)

Multi-Channel Power Meter: SATEC BFM-II

Highlights:

  • Multi-tenant power and energy meter
  • Up to 18 three phase or 54 single phase loads (or any combination)
  • Optional LCD display
  • 256MB Data logging
  • Self/ External powered
  • Remote CTs – up to 200 meters from device
  • Class 0.5S including the CTs (Solid Core, ANSI C12.16 & IEC62053-21)
  • Available communication: RS485, RS232, Ethernet, GPRS, Dialup modem, RF
  • Optional Digital Input & Analog Input modules
  • Communication Protocols: Modbus RTU, Modbus TCP, DNP3.0 and DNP/TCP
TOP